Just place a mold on the clamp unit of the AAC, input digits, and press the START button, then the workcycle (clamp, forward the mold to the nozzle, receive wax, hold it until wax gets hard, and unclamp) will be done automatically.
The rubber mold is always aligned with the injection nozzle of the wax injector by the 'Lateral Flexibility Mechanism' of the AAC.
10 different parameters of PRESS 1, PRESS 2, TIME of starting press 2, CLAMP, FORWARD, HOLD time can be stored. From 10,000 combinations of wax shooting, you can choose the optimum combination easily.
Power supply
AC100 - 240V, 50/60Hz, Single Phase
Power consumption
50 VA (Max.)
Compressed air supply
0.25 - 0.30 MPa
Pressure sensor display range
-5 - +240 kPa
Set range
- PRESS 1 (primary pressurization)
10 - 220 kPa
- PRESS 2 (second. pressurization)
10 - 220 kPa
- TIME of starting press
0 - 99.9 sec.
- Mold CLAMP
30 - 235 kPa
- Mold FORWARD
65 - 235 kPa
- Mold HOLD
0 - 300 sec.
Range of controlling D-VWI setting
- VAC time
VAC time
- INJ time
VAC time
Memory number
0 to 9
CLAMP count
9999
Dimensions
- Clamp Unit
157 (W) x 223 (H) mm,extends only, 150 mm from front of injector
Back to Product Range
D-VWIS Digital Vacuum Wax Injection System
Download product catalog 