Slide background

More Safety
& Easy Control

Slide background

Combining High Power
& Reliability

Slide background

Production of harder and more stable rubber mold is possible by applying high pressure. In the case of the AV3, maximum press power is 2325 kg (when 600kPa) which is approximately 1.9 times higher than conventional model. Further, fine pressure control by 10 kPa increments also possible.

Two-step pressurization is performed automatically based on preset operating conditions. Mold production of natural rubber, which needs difficult pressure adjustment, can be easily performed.

IMPROVING OPERATING EFFICIENCY

Heating space is as large as 270 (W) x 240 (D) x 130 (H), so a large-sized rubber mold can be produced.

The area of the heat plate has been expanded by 150% compared to the former model. A more lot of rubber mold can be produced at a time, so more improvement of operating efficiency is possible.

HIGH POWER PRESS

LARGE-SIZED OPENING

NEW TWO-STEP PRESSURIZATION

Slide background

Select a setting item from pressure temperature and time. Then turn the dial to change the set value. Finally push in the dial once to finish setting. Setting work can be performed quickly and comfortably.

Designed for safety by detecting abnormality such a deviation from standard supply pressure, heater malfunction, a wire break in thermo sensor, abnormal temp. rise of control unit and heater overheat to prevent accident.

PRECISE TEMPERATURE CONTROL

By the new style digital console panel, you can view contents of settings and operating status at a glance. Anyone can easily operate even when adjustment in fine increments is necessary for setting.

Since the function of precise temperature control by on degree Celsius step is installed, high quality molds of various rubber kinds can be produced.

DIGITAL CONSOLE PANEL SHOWS SETTINGS INFORMATION AT A GLANCE

PROTECTION DEVICE

Up to 99 sets of operation conditions of pressure, time, temperature, continuous heating value can be stored in the memory. Operation conditions of rubber molds can be controlled one by one, so work efficiency can be enhanced.

Equipped with function of displaying the progress chart for checking pressurization steps at a glance.


AV3 Advanced Vulcanizer

A New Style of Vulcanizer That Combines High Power Reliability

Advantages of AV3 Advanced Vulcanizer

  • More safety and easy to control
  • Large size opening – can vulcanize more rubber mold at one time .
  • High pressure for press
  • 2 steps pressurization
  • Digital controlled
  • 99 different memory for different vulcanization
  • Dual temperature plates
  • Accurate temperature controller
  • Excess rubber is discharge through the discharge groves by Yasui special designed frame.
Download AV3’s Brochure


Your Name (required)

Your Email (required)

Company

Country

Mobile


AV3 Advanced Vulcanizer